6 Effortless (and Non-Toxic) Ways to Get Rid of House Mold

6 Effortless (and Non-Toxic) Ways to Get Rid of House Mold

House mold is one of those pesky problems that inconveniences many homeowners and can be very detrimental to health. They are largely linked to lack of ventilation within the home and usually trigger respiratory problems and bouts of allergies. Mold also intensifies symptoms for those who have asthma and sinus problems. Below you’ll learn of a few safe ways to stop mold from invading your home plus how to get rid of them.

Tea Tree Oil

Tea tree oil is a natural fungicide and is therefore helpful in killing and preventing mold and mildew. Simply add 10-15 drops of the oil to a spray bottle filled with water. Shake the mixture well then spray onto hard surfaces where mold appears. Leave the solution to work on the area for a while before wiping it off.

Purify the Air

Be sure that the air in your home is rid of as many spores as possible to prevent the growth of mold and mildew. You can achieve cleaner air by investing in an air purifier or by having filters installed in air vents. Keeping windows open to promote air circulation is also helpful in avoiding excessive moisture which is the ideal environment for mold to thrive in.


If you happen to have a cheap bottle of this strong spirit lying around then it may come in handier than you think! Vodka is another great safe method for cleaning away unwanted mold. Just use a spray bottle to apply the vodka directly to the area and wipe clean.


Another good remedy to get rid of mold is using plain white vinegar. Vinegar is one of those cleaning ingredients that has been around for a long time and is probably already in your kitchen. It is naturally antimicrobial and works at killing unwanted fungus on spot. Simply fill a spray bottle with vinegar and spray on target!

Baking Soda Solution

Baking soda has long been held as a cleaning companion for various uses. You can team baking soda and tea tree oil to make a powerful home cleaning concoction. This process is a little more tedious and longer than others, but in the end it will be well worth it. All that’s needed is half cup of baking soda, 2 cups of water, and 2 teaspoons of tea tree oil. Thoroughly mix the water with the tea tree oil. Spray this solution onto the mold and let it sit for approximately 24 hours.

Repeat the process by mixing the same solution again but this time include the baking soda until it forms a paste-like consistency. Use this paste to smear over the same spot and scrub until it’s all gone.

Reseal Grout and Tiles

If you have removed mold from your grout and tiles you may want to reseal the area to prevent it from reappearing. The bathroom in particular is a feeding ground for mold and mildew because of moisture and poor air circulation. If you notice that your grout is starting to stain or is holding onto water, this could be a good sign that it needs resealing.

To recap:

  • Invest in a dehumidifier to get rid of moisture and dry damp areas.
  • Install filters on air vents.
  • Fix leaks and have plumbing issues looked after.
  • Quickly clean up spills.
  • Open doors and windows to promote air circulation.
  • Keep clothes and other fabrics dry and don’t leave wet clothes lying around.
  • Let in fresh air and sunlight
  • Clear air conditioning drip pans regularly.
  • Replace mildew-ridden shower curtains immediately.

Remember, prevention is key—mold and mildew love warm, humid areas, like bathrooms or a damp basement. There is no need to use bleach or other toxic cleaning substances, these natural and preventative methods will work well to fix small household mold problems.

Image: flickr.com/inspiredreamcreate

Leave a Reply

Your email address will not be published. Required fields are marked *